Connect your Public Address to your telephone system and use it to make announcements via your phone or even your mobile phone. 2N® SIP Audio Converter converts the sound from a SIP phone system to the classic analogue form so you can broadcast live or pre-recorded messages over the IP network to any distance.
- Two-way communicator
- Multicast broadcasting
- Using the IP audio features
Features and Benefits
Use the Converter with an external speaker as a simple Public Address system or with a microphone as a two-way communicator on the principle of a simple IP intercom.
Broadcast to an unlimited number of end devices, all without burdening your LAN/WAN with redundant data-streams.
USING THE IP AUDIO FEATURES
Set up different zones, schedule the broadcasting of pre-recorded tracks or regulate the volume. The Converter can easily be connected to 2N® IP Audio Manager software to take advantage of its countless possibilities.
External devices can be controlled using the relay or you can use it as a priority switch (override mode).
2N® SIP Audio Converter has a built-in amplifier with an output of 2×10 W so it can easily be connected to a speaker without the need of an external amplifier.
By connecting a microphone and a switch button you can call up to three pre-set numbers.
Easily adjust the volume using the remote control or web interface. This is especially handy when installing in high-up or relatively inaccessible places.
Simply plug the Converter into an existing LAN/WAN network. No tricky programming or cable installation.
The device is configured via a custom Web interface or the SW application, which saves time, especially in the case of larger-scale installations.
INFORMACAST PROTOCOL SUPPORT
The Informacast protocol allows for spoken or sound recording play back from Cisco devices.
INTEGRATION TO OTHER SYSTEMS
The speaker is easily integrated into third-party systems.